Building A Shed Using Pallet Wood (part 3 of 3)

My friend Alex needed somewhere to store his bike, so we made a shed out of pallet wood for his garden.  In this episode, we add some door trims, paint the roof with bitumen paint, add the roof felt, trim the roof and paint the shed. Alex adds some pimping electrics and moves his stuff in which concludes the build.

Building A Shed Using Pallet Wood (part 2 of 3)

My friend Alex needed somewhere to store his bike, so we made a shed mainly out of pallet wood for his garden.  In this episode, we build a roof for the shed and start making the doors.

Building A Shed Using Pallet Wood (part 1 of 3)

Woodwork video. My friend Alex needed somewhere to store his bike, so we made a shed out of pallet wood for his garden. In this episode, we salvage some pallets and make two side panels and the floor of the shed.

Making A Workshop Space-Saving Stand for the Electra Beckum HC260 planer/thicknesser

In this video, I design and build a space-saving stand for my planer/thicknesser the Electra Beckum HC260.  The idea was to create some additional worktop space in my small workshop for my drill press and bench grinder with space for the planer underneath.  Made entirely from salvaged materials. Turned out OK!

Making a simple framing spline jig

Here is a simple framing spline jig I made for my tablesaw, the DeWalt DW745

Making Hardwood Drinks Coasters

A friend of mine donated me some lengths of hardwood - oak, mahogany and teak (I think).  I used them to create these drinks coasters to give as Christmas gifts.  I got about 36 coasters in total out of the laminated block of wood - 8 sets of 4 coasters.  I had a few issues - the glue up was tricky and it took a while to find a finish I liked, but they looked good in the end!

Charnwood B350 - my new bandsaw

This week I took delivery of my new bandsaw, the Charnwood B350.  This is just a quick video talking about some of the features and my first impressions.  It's not a full review, just a quick overview

Making A Zero Clearance Insert for DeWalt DW745 tablesaw

Here I make a zero clearance insert for my DeWalt DW745 from a piece of pallet wood that I think is Poplar.

Making Push Blocks

Recently I made a couple of push blocks for using with my jointer, as I only had one and it was in bad condition.  They didn't turn out perfect, but they do the job

Making A Chest Of Drawers (part 2 of 2)

Here is a chest of drawers I made for my girlfriend using some salvaged dovetail jointed drawers that were found by some bins.

Part 2 covers making the feet, making the top, painting and applying finish and installing the drawer handles

Pages