Making A Workbench Out Of Salvaged Things (part 2 of 2)
In this video I make a worktop for the bench from some 1" thick salvaged plywood which came from some industrial packaging,
Then I re-fit my Redada Number 2 vise using a spare block between it and the worktop.
I fitted some drawer handles to the set of drawers that didn't already have them.
Then I fitted some pieces of pine to trim the worktop and the frame to cover the plywood edges and tidy up the look.
Finally I applied a few coats of varnish and show you what I've got stored in my new drawers