Making A Vinyl Display Unit
In this video I make a vinyl / record display unit in a mid century modern / vintage style for a friend.
The unit is made of 3/4 inch plywood that I bought at my local reclamation yard specifically for this build. The whole unit can be made with only one half of a full standard sheet of plywood.
I cut some dado housing joints to accommodate the bottom shelf to give it plenty of strength.
It was assembled with wood glue and brad nails, and finished with Rustic Pine Briwax.
The hairpin legs were purchased on eBay and they were simply screwed on.
This unit should hold around 60 records on each side - so 120 in total!
Free plans for this build are available on the Resources page!