Orazio / Katsu 24l low noise CHEAP air compressor - Too Good To Be True?

This is my review of the Orazio / Katsu model 241184 24l low noise oil less air compressor. 
 
Compressor on Amazon: https://amzn.to/2yKTLIC (UK)
Euro 1/4 BSP Air Hose Connector (female): https://amzn.to/2yOTILR (UK)

VLOG 7 - What's New / Channel Changes / Smart Workshop / California / Tool Talk

In this video I talk about my current projects and upcoming videos featuring a herringbone table, sanding block and large dog bed, changes to the channel and more frequent videos, smart workshop with the Amazon Echo, California and visiting Rockler where I bought some handscrew clamps and have a look at the timber section, and Tool Talk with my new Ryobi cordless hot glue gun.
 
Timings:
What's New 0:39
Channel Changes 2:59
Smart Workshop 4:14
California 7:29
Tool Talk 9:39
 
Links:

Making A Mid Century Style Step Stool / Foot Stool

In this video I use a salvaged mahogany wardrobe panel to make a step stool (or foot stool) with a mid century feel.  
First I cut a clean and straight edge along the length of the panel using my circular saw with a straight edge clamped down to guide the cut.  
Then I could reference that straight edge against the fence of my panel cutting jig at the tablesaw so that I could cut make a clean 90 degree cross cut.
I measured and marked up to cut what would be the length for the top panel of the stool.
And then I ripped it to width.

Hand Carved Wooden Spoon - Hand Tools Only Project

In this video I carve a wooden spoon from a piece of beech using hand tools only - I use a coping saw, chisels, a rasp, a spokeshave a handmade scraper and gouge chisel.
 
Here are the tools I use for making the scraper:
Diamond Plates 360/600 https://amzn.to/2PLmfYJ (UK) https://amzn.to/2NnbTSb (US)
 

Rustic Coffee Table Using Scaffold Boards

In this video I make a rustic coffee table using some old scaffold boards I found on top of a skip and some metal coffee table legs which I salvaged as part of an office clearance
 
Spray Paint: https://amzn.to/2yw4gOX (UK) 
 
In this video I'm going to be making a coffee table using some old scaffold boards I found on top of a skip which I took after asking permission ofcourse.
The boards had loads of character, very worn and weathered, they were also pretty badly warped too.

Girlfriend Makes Walnut Coasters

In this video my girlfriend Ria makes some geometric wooden hexagon coasters from an offcut of walnut as a gift for our friend.

Making Card Scrapers From Some Old Handsaws

In this video I make some card scrapers (also known as cabinet scrapers) out of some old rusty handsaws that I found in a skip by the side of a road.
 
How to sharpen a card scraper: How To Sharpen A Card Scraper / Cabinet Scraper To Get Wood Shavings https://youtu.be/h-KYqsAPMqk
 

My HiKOKI (previously Hitachi) cordless tools

In this video I talk about my new HiKOKI tools (formerly Hitachi).  Recently HiKOKI sent me their new line of MultiVolt and 18v tools, and in this video I talk about the new 36v MultiVolt platform, test the tools alongside some Makita and Hitachi 18v tools, and go through my opinions on each of the tools. 

Making Bedside Tables / Nightstands

In this video I make two bedside tables / nightstands with a retro/mid century feel.
Vlog 6 where I talk about the shop: https://bit.ly/2O33yj1
Varnish I use in this video: https://amzn.to/2MfgoIV (UK) 
Jay Bates video I mentioned: https://bit.ly/2Mg5ORZIn 

VLOG 6 - Work In Progress / Recommended Viewing / New Camera Gear / Tool Talk (feat. HiKoki & Bahco)

In this vlog, I talk about my recent and current projects, recommend some YouTube channels, new camera gear, and tool talk featuring HiKOKI and Bahco
 
Work In Progress links:
RG Scott's shop, Margate: https://bit.ly/2wVgTTT
Ercol Giraffe restoration video: https://bit.ly/2NxzEGi
Dining table restoration video: https://bit.ly/2oSjDwK
 
Recommended viewing links:

Pages