Making A Radiator Shelf

Here's a little shelf I made in an alcove next to my bedroom.  The shelf sits on top of some brackets that sit on top of the radiator so there are no fixings in to the wall.

Making A Cabinet With Sliding Doors

Here's a little storage cabinet with sliding doors I made for my spare bedroom to match existing furniture.

Boarding The Loft - the inexpensive way

Here's how I boarded out my loft floor on a tight budget using pallets and salvaged tongue and groove loft boards for under £100

Redada No. 2 Vise Restoration

Restoring an old Rededa Number 2 woodworking vise.  I bought it on GumTree for £20. t was old, dirty and rusty and in poor condition.  I gave it a clean, used a rust converter product, painted it with metal paint, fitted some plywood jaws, and finally fitted it to my workbench

Coffee Table

Here’s a coffee table I made for my mum and dad for Christmas.  They had a cheap, wobbly melamine table that was basically good for nothing - their cat could barely balance on it!

Building The Workshop (part 3 of 3)

Part 3 in a short series about building a workshop shed using some salvaged and new materials.

This video shows a quick tour of the workshop after it was finished, including a look at the tools I have, wood and tool storage, tool storage, condensation on the metal roof sheets and how I resolved the issue, installation of the electrical supply and cabling, and finally a summary of build costs.

Building The Workshop (part 2 of 3)

Part 2 in a short series about building a workshop shed using some salvaged and new materials.

This video covers the assembling of the frame, installing the shiplap cladding, installing the roof sheets and floor and making the door.

Building The Workshop (part 1 of 3)

Part 1 in a short series about building a workshop shed using some salvaged and new materials.

This video covers the ground works, the salvaged wood, a SketchUp model of the workshop, building a retaining block wall, making the frame, installing the windows, and starting to assemble.

This was my biggest ever project, and I don’t know if I’ll ever do anything bigger than this (unless I build myself a house some day!)

Frankensaw

Meet Frankensaw, my home-made table saw.  It’s made out of a circular saw mounted upside down to a basic table structure.  

Bike Shed

 

Biggest build yet!  I wanted to build something to put my lawnmower, bike and gardening bits in so that I could use my other shed just for storing lots of wood and all my tools.  Eventually I want to replace my other shed with a big workshop and get some workbenches and table tools in there, but that’s another story….

I made the frame first, from old 2x4 timber that used to be my friend’s scooter ramp.  He didn’t want the ramp anymore so we dismantled it a few months back and I’d been wondering what to do with it ever since.

Pages